Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Installation Across North Hollywood
A new garage door installation in North Hollywood typically runs $700-$2,200, and most single-door jobs are measured, ordered, and installed within one to two weeks. That’s the number to anchor on, and it stays the number: Servo quotes a flat, written price before any work starts, per Clause 1 of The Haven Standard. If your door was hung during the post-Northridge rebuild of 1994-1997, it’s now 25-30 years old and likely at end-of-life, which is why we see a concentrated wave of replacements across the Valley heat basin. Call (424) 372-1317 and a live person answers, 24/7.
Why Servo Garage Doors Tarzana Is North Hollywood’s Preferred Garage Door Installation Company
North Hollywood’s housing stock is mostly post-WWII bungalows and ranch homes built between 1945 and 1965, with narrow single-car garages that were never designed for modern double-door widths or heavier door panels. Our technicians know what’s behind those walls before they lift a panel. When we install a door on a Magnolia Park bungalow, we’re checking for the post-Northridge mismatched hardware that other installers miss: springs rated for the wrong door weight, brackets that were rushed in during the 1994-96 emergency rebuild, and framing that was never meant to carry a 250-pound steel door.
Servo is independently owned and operated under The Haven Standard. We don’t lean on urgency or upsells. We hand you a written scope and a flat price before touching anything, then document the whole job with photos: what we found, what we replaced, and what your leaving looks like before we arrive. Clause 4 of The Haven Standard means the technician photographs the failed component before quoting a replacement. North Hollywood homeowners read the three-star reviews and want evidence, not enthusiasm. We deliver the paper trail.
Marcus Deller leads our installation crews, and every technician who shows up in North Hollywood is background-checked and uniformed, with licensing you can verify on the page rather than buried in fine print. Emergency calls are answered by a live person who gives you a named technician and an on-the-way text, not a callback window. That matters when your door won’t close on Lankershim Boulevard at 1 a.m.
Our Garage Door Installation Services in North Hollywood
We install, replace, and retrofit every style of garage door across North Hollywood, from the single-car bungalow openings in Valley Village to the double-wide custom carriage doors on the ranch properties east of Vineland Avenue. Every job starts with a free measure and a written quote. No “call for a quote” evasion: the price range is on this page, in dollars.
New Door Installation
A new door installation in North Hollywood runs $700-$2,200 depending on width, material, insulation, and whether you’re reusing the existing track. We measure the opening, confirm the framing and header can carry the new door weight, and install with new rollers, hinges, and weather seal. If your 1950s single-car opening is being retrofitted to a double door for an ADU conversion, we’ll tell you what needs reinforcing before we order anything.
Single Car Door
Most of North Hollywood’s post-war bungalows have 8×7 or 9×7 single-car openings. We install steel and wood doors sized to those original openings, and we’re honest about whether a 9×7 door can physically fit a modern double garage without a header rebuild. On a ranch home off Hartland Street, our tech found a double-wide custom carriage door where the 1995 emergency-installed extension springs were visibly undersized for the door’s 250-pound steel weight - cables had frayed at the drums and the top panel was bowing from repeated Valley heat cycles. We swapped in a high-cycle torsion spring conversion rated for 25,000 cycles, replaced both cables and end bearing plates, and realigned the tracks in one trip so the homeowner could keep using their detached workshop without a second service call.
Double Car Door
Double garage doors for North Hollywood’s wider lots and new ADU-converted garages run $1,200-$2,200 installed, depending on steel gauge, insulation R-value, and whether you want a standard raised panel or a custom carriage style. The heat-basin geography here means aluminum panels bow outward from repeated thermal expansion cycles far faster than coastal LA doors. We recommend steel with a polyurethane core for North Hollywood installs, and we’ll tell you why: a door measured at an ambient 110°F on Vineland Avenue behaves differently than the same door spec’d in Sherman Oaks at 95°F.
Custom Garage Door
Custom doors for North Hollywood ranch properties and hillside homes run $1,500-$2,200 and up, built to the opening rather than forcing a stock door into post-1945 framing. We work with Amarr and Wayne Dalton to spec custom wood and steel carriage doors, and we handle the engineering details: spring ratings that match actual door weight, not the weight the previous installer guessed during the 1995 rush.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in North Hollywood
Servo installs and services doors from Amarr, Wayne Dalton, and Raynor, and we’re familiar with what each brand’s hardware does under North Hollywood’s sustained summer heat. We carry a stock of high-cycle torsion springs, cables, and bottom seals sized for the doors we see most often in this market: Amarr Classica steel doors on post-war bungalows, Wayne Dalton carriage doors on ranch properties, and the occasional Raynor aluminum door that’s already bowing from heat cycling. If we find a failed Amarr panel on a door we didn’t install, we photograph it, quote the replacement in writing, and show you the failed component before anything gets swapped.
Common Garage Door Installation Problems We See in North Hollywood Homes
- Post-Northridge mismatched hardware: Doors hung during the 1994-1996 rush often have springs, cables, or brackets rated for the wrong door weight. We find torsion springs that were never correct for a 250-pound double door, which explains the mysterious balance failures and premature cable fraying on doors that look like they should have years of life left.
- Heat-cycled aluminum panels bowing: Sustained 105-110°F summer temperatures outside North Hollywood homes cause repeated thermal expansion that warps sectional door panels. Coastal or hillside LA installers rarely see this at the same intensity, because the Valley’s heat-basin geography means the heat is genuinely sustained, not an occasional spike.
- Narrow 1950s single-car openings retrofitted with modern double doors: Garage conversions and ADU remodels across North Hollywood force wide doors into framing never designed for them. The result is track misalignment and photo-eye sensor faults from day one, and we re-true the tracks and re-shim the frame before installing.
- Springs losing calibrated tension season over season: The heat basin accelerates torsion spring fatigue far faster than the same hardware would fail near the coast. A spring that should last 10,000 cycles might lose meaningful tension after three or four North Hollywood summers. We spec high-cycle springs rated for 25,000 cycles on any door that’ll see daily use.
Pricing for Garage Door Installation in North Hollywood, CA
These are the flat, written prices you’ll see on a Servo estimate in North Hollywood. They are quoted and agreed before any work starts, and they don’t change once we’re on site unless you approve a written change order. That’s Clause 1 of The Haven Standard, and it’s non-negotiable.
| Service | North Hollywood Price Range |
|---|---|
| New Door Installation | $700-$2,200 |
| Spring Repair | $180-$340 |
| Cable Repair | $130-$250 |
| Track Realignment | $120-$240 |
What moves a North Hollywood installation between the low and high ends of that range: door width (single vs. double), material (steel vs. wood vs. custom), insulation requirements, and whether the existing track and framing can be reused. A standard 9×7 steel raised-panel door on a Valley Village bungalow typically lands around $900-$1,300. A custom wood carriage door with high-cycle springs on a ranch property off Hartland Street runs $1,800-$2,200. Every Servo estimate includes the document: a written line-item scope, the photo record, and the flat price. Call (424) 372-1317 for yours - it’s free, and it arrives before any work is scheduled.
We Also Serve Cities Near North Hollywood
Servo’s North Hollywood crews also cover Studio City, Van Nuys, Burbank, and Sherman Oaks. If you’re in one of those areas and need Garage Door Installation with the same written-price-first process, we’ll send a named technician with an on-the-way text. For homeowners comparing contractors in North Hollywood specifically, this page is the price reference: flat, written, and in dollars.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in North Hollywood
The San Fernando Valley heat basin means North Hollywood routinely hits 105-110°F from June through September, and that sustained heat accelerates torsion spring fatigue far faster than coastal LA neighborhoods experience. A standard spring on a daily-use door loses calibrated tension season over season, and we regularly spec high-cycle springs rated for 25,000 cycles on North Hollywood installs to extend that interval. Call (424) 372-1317 and we’ll measure your door’s weight, photograph the spring, and quote a written replacement price.
Yes, and it’s concentrated in North Hollywood for a specific reason. Doors hung during the 1994-1996 post-quake rebuild rush often have springs, cables, or brackets rated for the wrong door weight, and 25-30 years later those mismatched components fail simultaneously. We see it every week: a door that looks fine suddenly won’t balance because a post-1995 spring was never correct for the panel weight. We photograph the failed component before quoting a replacement, per Clause 4 of The Haven Standard. Call (424) 372-1317 for a written diagnosis.
Yes, but only if the framing and header can carry the wider opening and heavier door. Most of North Hollywood’s 1945-1965 bungalows were framed for 8×7 or 9×7 single-car doors, and forcing a 16×7 double door into that opening without reinforcing the header leads to track misalignment and photo-eye faults from day one. We’ll measure the existing framing, tell you what needs reinforcing, and quote the full conversion in writing before ordering anything.
In North Hollywood’s heat basin, every 18 to 24 months, versus the 3-5 year cycle coastal LA homeowners expect. The sustained triple-digit summer temperatures harden and crack vinyl and rubber bottom seals within a single season. We stock the seal profiles for the Amarr, Wayne Dalton, and Raynor doors common in this area, and we’ll replace yours on the same visit as any spring or cable repair. Call (424) 372-1317 for a written quote.
The correct torsion spring size depends on your door’s exact weight and height, not a generic chart. Most post-war North Hollywood single-car doors need a spring in the 0.207-0.250 wire diameter range, but the post-Northridge mismatched hardware problem means we weigh every door before spec’ing springs. We photograph the existing spring, measure wire diameter and coil count, and quote the correct high-cycle replacement in writing. Call (424) 372-1317 and we’ll confirm the spec on site.
Written by Marcus Deller, Owner at Servo Garage Doors, serving North Hollywood since 2015.